Condensing Unit Enclosures
|
PSE Series
State of the art enclosures for
1/2 - 10 HP units - UL Listed.
|
ECO Series
Economy enclosures for
1/2 - 3 HP units.
|
Protector Series
Specially designed to accommodate ANY Maneurop unit - UL Listed.
|
PSE Series
9 SIZES ACCOMMODATE MOST CONDENSING UNITS ½ THRU 10 HORSEPOWER UNITS.
 Galvanized Steel Base
Galvanized Steel Cabinet Embossed--20 GA.
Hinged Access for Easier Servicing
Wind Safety Latch--See Insert
Shipped Knocked Down for Convenient Warehousing
Easily Assembled in the Shop or on the Job
All Necessary Fasteners Provided
 Click here to search for an enclosure
Click here for dimensions and specs
Click here for options and special kits
ALL SEASON WEATHER PROTECTION
Front Louvers are at a 45 degree Angle
Rain Trough Under Hinge to Catch Moisture That Might Seep Through Hinge
Condenser Screen Protected with a High Temperature Baked-On Clear Lacquer Coating
ECO Series
5 POPULAR SIZES ACCOMMODATE MOST CONDENSING UNITS ½ THRU 3 HORSEPOWER UNITS.
SETS UP EASILY WITHIN MINUTES
NO SPECIAL TOOLS NEEDED
CLEAR INSTRUCTIONS INCLUDED
ALL UNITS HAVE A SOLID BASE AND ARE TOTALLY GALVANIZED STEEL FOR YEARS OF DEPENDABLE TROUBLE-FREE SERVICE
ALL FASTENERS PROVIDED
REMOVABLE TOP GIVES EASY ACCESS TO UNIT FOR INSPECTION AND SERVICE
Click here to search for an enclosure
Click here for dimensions and specs
Click here for options and special kits
Protector Series
8 SIZES ACCOMMODATE ALL MANEUROP CONDENSING UNITS.
Embossed Galvanized Steel Cabinet
Unit Mounts Directly to Maneurop
Easily Assembled in Shop or On-Site (Assembly Instructions Provided)
All Necessary Fasteners Provided
Click here to search for an enclosure
Click here for dimensions and specs
Click here for options and special kits
PCU-2000
Side-Mount condensing unit covers for walk-in coolers and freezers.
Constructed of 20ga Embossed Galvanized Steel
14ga framing
Designed for ¼-3 hp units
Allows for direct mounting to any small walk-in cooler or freezer
4-5 hp models available for roof-mounted units
Noise Reduction Enclosures
RDM Products' Noise Reduction Enclosures are designed to efficiently trap the sounds of noisy machinery within their walls.
16 GA Galvanneal Exterior
22 GA Galvanized Perforated Interior
Acrylic Modified ALKYD Enamel Finish with Epoxy Primer
Mineral Wood Fire & Sound Insulation
Removable Access Panels (Lift-Out Standard)
Other Configurations Available
Easily Assembled
E-Z-LOK Shelving
Sturdy steel shelves are designed for use with above shelf brackets.
Standard shelves are 18” in width and 48” in length
Shelves are made of 18ga galvanized steel
Other sizes available by special order
Uprights are channel-shaped with 3/16" x 1" long slots for mounting shelf brackets
Counter-sunk holes are located every 6” for mounting on walls
Standard packs of 4, 6, or 10 uprights
All necessary fasteners for mounting are provided
Standard size – 72”
Special lengths available
Bracket slips quickly into place
Unique design allows up to two shelf ends and locks them in place
Standard packs are 4, 6, & 10 for 18” shelves
Special length brackets available by request
|
